Publish Time: 2026-11-19 Origin: Site
Does your concrete batching plant need a continuous supply of ice, or only a smaller amount each day? For fishery businesses, is direct cooling more important, or do you need ice that can be stored and sold in hot weather?
Different applications require different ice production and supply methods. Both direct cooling block ice machines and flake ice machines can be used for industrial cooling, but they differ in production capacity, ice storage, supply systems and supporting equipment. This guide compares the two machines in concrete cooling and fishery applications to help you choose the right solution for your project.
The main differences between these two machines are the ice shape, production method and how the finished ice is supplied.
Comparison | Direct Cooling Block Ice Machine | Flake Ice Machine |
Ice type | Large solid ice blocks | Thin flakes of ice |
Production method | Batch production | Continuous ice production |
Ice supply | Produce in advance and use when needed | Continuous supply during operation |
Cooling characteristics | Crushed before use in concrete or other cooling applications | Large contact area for direct cooling |
Storage | Blocks can be stacked in a cold room | Usually stored in an insulated ice storage bin |
Ice discharge | Automatic ice discharge and pushing device | Ice scraping and conveying system |
Common supporting equipment | Cold room and ice crusher | Ice storage bin, conveyor and weighing system |
A direct cooling block ice machine freezes water into solid ice blocks through a direct cooling system. It comes with an automatic ice discharge and pushing device, which pushes the finished blocks out of the machine without requiring a lifting crane. The blocks can then be stacked in a cold room for later use.
A flake ice machine produces thin flakes continuously. The finished ice is usually collected through an ice scraping and conveying system before entering an insulated storage bin. It can then be supplied to the production area according to actual demand.
When choosing between the two, it is important to consider more than the ice shape. Daily ice consumption, supply requirements and available storage space also matter.
During concrete production, ice can replace part of the mixing water to help control the temperature of fresh concrete. For concrete batching plants, the key factors are daily ice consumption and whether the ice supply can keep up with the mixing process.
For concrete batching plants with high daily ice consumption, a flake ice machine is suitable for building a continuous and automated ice supply system.
Freshly produced flake ice can be transferred by a screw conveyor into an insulated cold room for storage. When concrete production starts, an ice rake system collects the stored flakes and moves them toward the conveying and weighing equipment. The system then supplies the required amount of ice according to each concrete batch.
A complete flake ice system for concrete cooling may include:
Flake ice machine: Produces flake ice continuously.
Cold room: Stores the finished ice.
Ice rake system: Collects and moves ice from the storage area.
Screw conveyor: Transfers ice to the designated area.
Weighing system: Controls the ice quantity required for concrete production.
These components work together to connect ice production, storage, conveying and weighing. This setup is suitable for concrete batching plants with large and stable ice demand that want to reduce manual handling and improve the ice supply process.
For a concrete cooling project in Mexico, ICEMEDAL supplied a 35-ton flake ice production system equipped with a cold room, ice rake system, screw conveyor and weighing unit. The setup was designed to store and deliver ice for the customer's concrete mixing operations.
If a concrete batching plant does not need a large amount of ice every day, a direct cooling block ice machine can be a practical option.
The machine produces solid ice blocks in batches and uses an automatic discharge and pushing device to remove the finished blocks. They can then be stacked in a cold room until needed. Before use, the blocks are crushed into smaller pieces with an ice crusher to suit the concrete mixing process.
Unlike a large flake ice supply system, a block ice setup does not include an ice rake system. It is therefore more suitable for projects with lower daily ice consumption, where ice can be produced in advance and collected when required. It is not designed for large-scale, continuous automated ice supply to concrete batching plants.
If your batching plant has high daily ice consumption and needs continuous production with automated storage, conveying and weighing, a flake ice machine is generally a better fit. If your project needs a smaller amount of ice each day and can use a planned production and storage schedule, a direct cooling block ice machine may be more suitable.
For fisheries and seafood processing, the main considerations include fish preservation, working conditions, ice storage and whether the ice needs to be sold or transported in bulk.
Flake ice has a thin shape and can spread around fish and seafood more evenly. Its relatively large contact area makes it suitable for direct cooling during handling, processing and storage.
At fishing ports, fish markets and seafood processing plants, flake ice can be conveyed directly to the working area for fish preservation, sorting and processing. For businesses with regular daily production and a continuous need for ice, a flake ice machine provides a convenient source of fresh ice.
If your main requirement is to apply ice directly around seafood and use it throughout the working day, a flake ice machine is worth considering.
For fishing businesses and ice wholesalers, preparing ice in advance can be important, especially in hot climates where storage and transportation need careful planning.
Solid ice blocks have a relatively small exposed surface area compared with the same amount of crushed ice. When stacked and stored in a cold room, they are convenient for bulk storage. Before sale or use, the blocks can be crushed into the required sizes.
For example, ICEMEDAL supplied a 10-ton direct cooling block ice machine to a customer in the Republic of the Congo. In the local hot climate, block ice makes it easier to prepare ice in advance, store it and supply it to wholesale customers. The blocks can also be crushed according to different customer requirements.
For businesses that need to produce ice ahead of time, store it in bulk and supply wholesale markets, a direct cooling block ice machine can be a suitable option.
If your business needs ice for direct contact with fish and seafood, with regular daily use, a flake ice machine is a practical choice. If your priority is bulk storage, wholesale sales and ice transportation, especially in hot regions, a direct cooling block ice machine may be worth considering.
The investment in an ice production project includes more than the ice machine itself. Storage, conveying, crushing and automation equipment can also affect the total project cost.
Cost Item | Block Ice Production Setup | Flake Ice Production Setup |
Main machine | Direct cooling block ice machine | Flake ice machine |
Ice discharge | Automatic discharge and pushing device | Ice scraping and conveying system |
Storage | Cold room | Insulated ice storage bin or cold room |
Ice processing | Ice crusher, if smaller pieces are required | Usually no crushing required |
Conveying system | Equipment selected according to the application | Screw conveyor and ice rake system, if required |
Automation | Based on the ice collection and supply method | Automatic weighing and ice supply systems, if required |
The main supporting costs for a block ice setup usually come from the cold room and ice crusher. A flake ice setup may require additional storage, ice raking, conveying and weighing equipment. For large concrete cooling projects in particular, the complete flake ice supply system needs to be designed according to the site layout and production process.
There is no fixed rule that one machine type always costs less than the other. The total investment depends on daily production capacity, refrigeration system configuration, automation level, storage requirements and local installation conditions.
Contact ICEMEDAL to discuss your project and find an ice production setup that fits your needs.
Home Product Center Applications Case Company Profile News Contact Us