Common Troubles and Solution of Tube Ice Machines

Tube ice machinesare an essential of equipment for any business that requires ice for a variety of uses, such as food preservation, beverages, and cooling systems. However, like any other machinery, there are quite a few problems associated with ice tube machines. In this article, we'll look at common problems associated with tube ice machines and describe how Hunan Icemedal Refrigeration Equipment Co. can help solve these issues.

Ice tube machine in the process of use, common failures mainly include unable to start, water leakage problems, slow ice-making speed and other problems.

1. Failure to start: Failure to start the tube ice machine is a common problem in operation. This not only affects production efficiency, but may also indicate a potential electrical fault in the equipment. Troubleshooting this type of fault requires a systematic approach and certain electrical knowledge:

Power supply problems:check whether the power outlet is energised and whether the plug is firmly connected; make sure that the power switch of the ice tube machine is turned on; use a voltmeter to detect whether the power supply voltage is in line with the requirements of the equipment; and whether the fuse is blown or the circuit breaker is tripped.

Control circuit failure‌:Check whether the circuit board is short-circuited or damaged; confirm whether the emergency stop button is pressed; whether the start button and control relay are working normally‌.

Compressor problem: Check whether the thermal overload protection of the compressor is activated; whether the phase sequence of the power supply is correct.

Sensors and Controllers: Check the tank water level sensor and temperature controller are working properly.

2.Leakage problem: Tube ice maker leakage is a relatively common problem, you can line up the relevant accessories, as long as the daily use and maintenance are proper, can be effectively avoided:

The water tank or water pipe is blocked: The water tank or water pipe is one of the important parts of the tube ice maker. Check whether there are impurities in the water tank or water pipe, and clean or replace them regularly.

Water inlet valve failure: The water inlet valve is the control device for the water inlet of the tube ice maker. Check whether the water inlet valve is damaged or faulty.

Water Pump Failure: The water pump is the key component in draining the tube ice machine, check the pump for damage or failure.

3.Slow ice making: tube ice making machine needs to cool the water to a certain temperature in order to make ice, if the ice is slow, may be due to a variety of reasons, according to the specific circumstances of the corresponding measures to solve the problem is the key to solving the problem:

Refrigeration system problems: check the pressure of the refrigeration system whether the refrigerant is insufficient or leaking; confirm whether there are non-condensable gases in the system leading to high pressure protection.

Control system failure: Check the water temperature probe and replace or adjust the resistance if necessary.

Evaporator problem: Regularly check and clean the scale in the evaporator; check whether the evaporator is deformed.

Defrost system failure: Check whether the defrost solenoid valve is operating normally

Water circuit problem: Check whether the condenser water circuit is normal or insufficient to ensure sufficient cooling water flow.

Wear of mechanical parts: Check the wear of the fan or compressor, perform regular maintenance, and replace worn parts when necessary.

Environmental factors: Try to keep the environment at the right temperature and the water temperature under control.

Tube ice machines play an important role in the daily operation of enterprises, but their common problems may affect their production and operational efficiency. Icemedal Refrigeration Equipment Co., Ltd. is able to effectively solve these problems with its advanced technology and high quality service, helping enterprises to achieve efficient and stable production. Choosing Hunan Icemedal Refrigeration Equipment Co., Ltd, you will get reliable ice-making equipment and full technical support.